Welcome Fall!

Halloween and Fall items are now listed in the Etsy shop with more to come! Remember, always free shipping on domestic orders $25 and over using code FREESHIPPING25 at checkout.

SHOP: Re-Purposed and Recycled Fabric Flowers

 It feels good not to have to throw something away. Instead, I have been reusing, re-purposing, recycling clothes, scraps of fabric, etc... and making sculpted fabric hair flowers! What a beautiful way to create less waste.

HOW TO: Loopy Flowers

What you will need: 

-3/8" ribbon in various colors {8 pieces of each color you want. For this: 8 pieces of Purple @ 2.5 inches; 8 pieces of Green @ 2 inches; 8 pieces of YellowGold @ 1.5 inches} You can add as many layers as you want.

-Lined Alligator Clip {or other clip of your choice}

-Hot Glue

-Needle and Thread

-Center Accent{s}

 1} Measure and Cut all ribbon to size. {For this Flower: 8 pieces of Purple @ 2.5 inches; 8 pieces of Green @ 2 inches; 8 pieces of YellowGold @ 1.5 inches} You can add as many layers as you want as long as you keep your sizes in succession. Larger flowers can start at 3 or 3.5 inches, then gradually taper your layers down from there. I don't recommend doing the inside loop any smaller than 1 inch.


2} Heat seal all ends.

3} Double thread your needle and knot end.




4} Collect one piece of ribbon of each size, layer biggest to smallest and thread needle through. 

5} Loop opposite ends of ribbon over and thread through.

6} Repeat the same process until you have all 8 "petals" completed.

7} Once all 8 "petals" are complete, pull thread tight and knot together with beginning thread.

8} Here is what you "flower" should now look like. Next you can  hot glue your center accent{s} that you have chosen.

9} Attached your flower to a lined alligator clip or other clip of your choice. If you plan on using a French Barrette I recommend lining the top of the barrette with a coordinating ribbon color since the metal will show through the spaces in the bows.





10} After you bow is finished and mounted, you have the option of starching the entire bow {with spray on shirt starch}, this helps to keep the petals in their desired shape without a lot of flopping around during wear. Simply lay the bow on a piece of foil or paper towel, gently spray with starch, allow to dry. Voila!

HOW TO: Korker Bows

What you will need:
-Curled Ribbon (3/8" for this tutorial, but you may use smaller/larger. See Curled Ribbon tutorial if needed)
-Measuring Tape
-Needle and High Quality Thread (some people use embroidery floss, whatever works for you)
-Clip & Hot Glue
-Lighter (or other means to seal edges)

1} Choose your color(s) ribbon that you will be using and cut to size. {At this point you can heat seal your ends or you  can wait until your bow is finished. I like to heat seal now. Heat sealing prevents fraying. To do this, lightly run the cut edge of your ribbon close to a flame {Not too close                      
or your ribbon may burn.} If you want a small puffy korker you can cut your ribbon pieces to about 2" each, for a larger bow your pieces can be longer. The more pieces of ribbon you use the more full your bow will be.



2} Put your ribbon together. I arrange my ribbon in the order I want then thread them through the center, one on top of the other, until all ribbon is used. Once I have used all of my ribbon, I pull my thread all the way through. I then like to push the needle back through my ribbon and tie a knot at the same spot I started. For me, this gives the bow extra strength and hold, I know that it is not going to coming apart. I then like to dab a little hot glue onto my knot, this helps me to feel like the thread is "sealed". By no means is this the tride and true way, or the only way to make a korker. I have seen people make them several different ways using different materials. This is what is most comfortable for me and gets me the results that I want. I encourage you to find what works best with you, gets you good results, and go with that.

3} Choose you clip type. If you are going to use a french barrette you can simply glue it to the underside of the bow. If you are going to use an alligator clip you will need to line the clip first, then glue to bow. You can also attach these to ponytails holders and snap clips. There are many different things you can do with korkers, you can even add embellishments to the center.

4} Fluff and arrange your bow to achieve your desired look. Once finished you may want to starch your bow using spray starch (the same as you would use when ironing- who does that?!? not me; anyway, just spray the starch on and allow to air dry) to guarantee that your bow keeps the curl and shape that you want.


* Below I have included some other ideas/versions of korkers that I have made.

I hope this has been helpful! Happy Making!

Visit my Etsy shop to see more:

https://www.etsy.com/shop/krapflgirl?ref=si_shop

SHOP: 10%OFF SALE

Until May 31, 2103 my entire Etsy shop will be 10% off, including Made to Order items!

Stop by the shop for some great items! And as always domestic shipping is free with a purchase of $25 or more (use code FREESHIPPIN25 at checkout)!

CRAFT: Crayon Rounds

The kids and I just made these cute crayon rounds to use as an activity at an upcoming birthday party. My daughter is a budding artist so we always have a ton of old and broken crayons around the house.

Here is how we made them:

1) Remove paper from crayons.

2) Break crayons into small pieces. I let the kids make up their own color combinations.

3) Put pieces into mini muffin pan (or other mold, you can even use metal cookie cutters. I do not recommend using silicone since I have read that the crayon does not easily clean off of it)

4) Bake in a preheated 275 degree oven for 10 minutes or until all pieces are sufficiently melted.

5) Remove from oven. Let pan cool for about 30 minutes.

6) Once cool, put pan into the freezer for 15 minutes.

7) Turn out onto counter covered with dish towel. The rounds will readily pop out and may chip or break if there is not a soft surface to land on.

Done! We are storing our rounds in a zippered sandwich bag until the big day.

RECIPE: Good Morning Breakfast Cookies

I always worry about my other half eating a decent breakfast. He is usually rushing out the door in the mornings, if there isn't something quick and easy that he can eat on the run he usually forgoes eating breakfast all together.  These "cookies" are a great, easy go-to for those rushed mornings.

3 Large Bananas, mashed
1/2 C  Applesauce, unsweetened
2 C Rolled Oats
1/4 C Soy or Almond Milk
2/3 C Raisins (or other dried fruit, i.e. Blueberries, Cranberries, Apricots)
2 Vanilla beans, scraped or 1 tsp. vanilla extract
1/4 C Wheat Germ
1/4 C Golden Flaxseed Meal or Ground Flaxseed
1/8 tsp Nutmeg
1 tsp Cinnamon
Optional :
1/2 C Lowfat Greek Yogurt, Plain or Vanilla ( I add this for extra protein)
1/4 C Demerara Sugar
1/3 C Sliced Almonds
Handfull Ghirardelli Chocolate Chips

1)Preheat over to 350.

2)Mix all ingredients together in large bowl.

3)Bake 20 mins. on silicone mat or foil-lined cookie sheet.

This recipe makes 24 good-sized cookies. I bag them up, 3 or 4 to a bag. I usually leave 1/2 of them out for the hubby to take for breakfast during the week and freeze the rest to use later.

HOW TO: Curl Ribbon

What you will need:

-Small wooden dowels (I use 1/4" dowels, but you can use a smaller or larger size depending on  the look you are going for)

-Clothes Pins (any size will do)

-Spray bottle with water

-Ribbon (Solid/Non printed, Grosgrain 100% Polyester, 3/8" ribbon works best; other ribbons may melt, burn and/or ignite in the oven) 

1} Preheat your oven to 225 degrees.



 2} Wrap your ribbon in a single layer around your wooden dowel and secure ends with clothes pin.



3} Using the spray bottle, generously spray the water over ribbon and clothespins. If you don't have a spray bottle handy, you can use the spray nozzle on your faucet.



4} Put ribbon on clean cookie sheet or line your oven rack with foil and place directly on the rack.

5} Leave ribbon in oven for 10-15 minutes or until completely dry. This time may be more/less depending on how wet you got your ribbon, especially when using your faucet nozzle, so be sure to keep an eye on it. (*When the ribbon is dry I usually turn the oven off and leave the ribbon in the oven until cool, but this is not a necessary step)

6} When ribbon is cool to touch, gently unwrap from dowel. And there   you have it, curled ribbon! 

(*Note: You can use spray starch (like what you would use on a shirt you are ironing) on your ribbon pieces to ensure they keep their shape, this is especially useful when making korker hair bows. You can also starch the whole bow when it is fully made. Simply lay bow or bow pieces onto foil or paper towels, spray with starch, and leave to air dry. When fully dry ribbon pieces, or bow, will be more stiff and will hold shape very well and after many uses.)